Filtration Engineering Model M93LAB S/S, Laboratory / Pilot Plant, Membrane Filtration System Mounted on Common S/S Skid. Can be configured for All Membrane Types Including Reverse Osmosis, Ultra Osmosis, Ultra Filtration, Microfiltration. Sanitary or Spiral Wound Membrane Types. PLC Controlled For Automated Operation and Data Collection. Variable Speed Pumping Via Frequency Drives Allow Feed and Recirculation Flows to be Adjusted For Optimal Testing. With Approx 40 Gallon S/S Single Wall Feed Tank, 22 in ID, 28 in Straight Side, Open Top, Dish Bottom with Temperature Gauge and Feed Throttling Valve. Wanner Model H25 10 HP 316 S/S High Pressure Pump (18 GPM at 600-650 PSI). (2) Fristam Model FPHP722145 Stainless Steel 7.5 HP Centrifugal Booster Pumps, (8) 7 ft L x 4 in Diameter S/S Membrane Filter Housings to Accommodate (16) 3.8 in x 38 in Membranes with 1.5 in Diameter Tri-Clamp Side Outlets and 7/8 in Diameter Tri-Clamp End Outlets. (2) S/S Shell and Tube Heat Exchangers Including One Allegheny Bradford (S/N 022334111) with Maximum Working Pressure: Shell- 90 PSI at 300 Degrees F, Tube- 100 PSI at 300 Degrees F, 2007, (No Tag on Other Heat Exchanger). (2) 4 in Diameter x 32 in L S/S Filters with S/S Housings. Allen Bradley PLC Panelview 300 Interface. Misc S/S Valves, Pressure Gauges, Piping. System Has a Nominal Testing Capacity of 7 Gallons Per Minute For Water in a Reverse Osmosis Application. Includes a Unused Baldor Model CSSEWDW3709T 7.5 HP Stainless Steel, TEFC Drive Motor, 208/230/460 V, 3 Ph, 60 Hz, 3,500 RPM, 19.9-16.8/8.3 Amp. Mounted on Common 2 in x 2 in S/S Square Tube Frame.